To get access to Pace Plc 4111N-031 router, you need the login IP address of your router, the username, and password.
You can find these info in Pace Plc 4111N-031 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the Pace Plc 4111N-031 Router
The Pace Plc 4111N-031 has a web interface for configuration. You can use any web browser to log in to the Pace Plc 4111N-031 router.
Put the IP Address(without “http://” or “https://”) of your Pace Plc 4111N-031 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Pace Plc 4111N-031 login data.
Default login data for Pace Plc 4111N-031
You need to know the username and password to log in to your Pace Plc 4111N-031 router. We listed below.
|Model||Ip||Username & Password|
|Pace Plc 4111N-031||192.168.42.1||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Pace Plc 4111N-031 Login Problems
If you not be able to get a login to your router, here are a few possible solutions you can try.
The Password of Pace Plc 4111N-031 Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Pace Plc 4111N-031 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Pace Plc 4111N-031 Router To Default Settings?
If you can’t get logged in, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change Pace Plc 4111N-031 Default Wifi Name (SSID)
By default, some Pace Plc 4111N-031 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Pace Plc 4111N-031
MAC filtering allows you to restrict access to your Pace Plc 4111N-031 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Pace Plc 4111N-031 router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.42.1 on the address.
- Enter the username and password for Pace Plc 4111N-031 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.