Default Password for Pace v5542 telecom Router

To get access to Pace v5542 telecom router, you need the login IP address of your router, the username, and password.

You can find these info in Pace v5542 telecom router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Pace v5542 telecom Router

The Pace v5542 telecom has a web interface for configuration. You can use any web browser to log in to the Pace v5542 telecom router.

Put the Login IP Address of your Pace v5542 telecom in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Pace v5542 telecom login username & password.

Default login data for Pace v5542 telecom

You need to know the username and password to log in to your Pace v5542 telecom router. We listed below.

Model Ip Username & Password
Pace v5542 telecom 192.168.1.254 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Pace v5542 telecom Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Pace v5542 telecom Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Pace v5542 telecom router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Pace v5542 telecom Router To Default Settings?

If you can not login the setup page of router, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Pace v5542 telecom Default Wifi Name (SSID)

By default, some Pace v5542 telecom routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Pace v5542 telecom

MAC filtering allows you to restrict access to your Pace v5542 telecom router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Pace v5542 telecom router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for Pace v5542 telecom router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

5 × 2 =