To get access to Paradyne 6211-I2 router, you need the login IP address of your router, the username, and password.
You can find these information in Paradyne 6211-I2 router manual. But if you lost it, then you can use the quick guide below.
Login to the Paradyne 6211-I2 Router
The Paradyne 6211-I2 has a web interface for configuration. You can use any web browser to log in to the Paradyne 6211-I2 router.
Put the Internal IP Address of your Paradyne 6211-I2 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Paradyne 6211-I2 login username & password.
Default login data for Paradyne 6211-I2
You need to know the username and password to log in to your Paradyne 6211-I2 router. We listed below.
|Model||Ip||Username & Password|
|Paradyne 6211-I2||192.168.1.1||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Paradyne 6211-I2 Login Problems
If you can’t get a login to your router, here are some possible solutions you can try.
The Password of Paradyne 6211-I2 Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Paradyne 6211-I2 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the Paradyne 6211-I2 Router To Default Settings?
If you can not get logged in, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.
Change Paradyne 6211-I2 Default Wifi Name (SSID)
By default, some Paradyne 6211-I2 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Paradyne 6211-I2
MAC filtering allows you to restrict access to your Paradyne 6211-I2 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Paradyne 6211-I2 router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for Paradyne 6211-I2 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.