Default Password for Paradyne 6218-I2 Router

To get access to Paradyne 6218-I2 router, you need the login IP address of your router, the username, and password.

You can find these data in Paradyne 6218-I2 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Paradyne 6218-I2 Router

The Paradyne 6218-I2 has a web interface for configuration. You can use any web browser to log in to the Paradyne 6218-I2 router.

Put the IP Address(without “http://” or “https://”) of your Paradyne 6218-I2 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Paradyne 6218-I2 login data.

Default login data for Paradyne 6218-I2

You need to know the username and password to log in to your Paradyne 6218-I2 router. We listed below.

Model Ip Username & Password
Paradyne 6218-I2 192.168.254.254 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Paradyne 6218-I2 Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Paradyne 6218-I2 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Paradyne 6218-I2 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Paradyne 6218-I2 Router To Default Settings?

If you can’t login the setup page of router, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Paradyne 6218-I2 Default Wifi Name (SSID)

By default, some Paradyne 6218-I2 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Paradyne 6218-I2

MAC filtering allows you to restrict access to your Paradyne 6218-I2 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Paradyne 6218-I2 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.254.254 on the address.
  2. Enter the username and password for Paradyne 6218-I2 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

eighteen − eleven =