Default Password for Paradyne 6381-A3 Router

To get access to Paradyne 6381-A3 router, you need the login IP address of your router, the username, and password.

You can find these information in Paradyne 6381-A3 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Paradyne 6381-A3 Router

The Paradyne 6381-A3 has a web interface for configuration. You can use any web browser to log in to the Paradyne 6381-A3 router.

Put the Login IP Address of your Paradyne 6381-A3 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Paradyne 6381-A3 login infomation.

Default login data for Paradyne 6381-A3

You need to know the username and password to log in to your Paradyne 6381-A3 router. We listed below.

Model Ip Username & Password
Paradyne 6381-A3 192.168.0.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Paradyne 6381-A3 Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Paradyne 6381-A3 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Paradyne 6381-A3 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Paradyne 6381-A3 Router To Default Settings?

If you can’t login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Paradyne 6381-A3 Default Wifi Name (SSID)

By default, some Paradyne 6381-A3 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Paradyne 6381-A3

MAC filtering allows you to restrict access to your Paradyne 6381-A3 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Paradyne 6381-A3 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Paradyne 6381-A3 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

19 − 5 =