Default Password for PCI BLW-54MF Router

To get access to PCI BLW-54MF router, you need the login IP address of your router, the username, and password.

You can find these info in PCI BLW-54MF router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the PCI BLW-54MF Router

The PCI BLW-54MF has a web interface for configuration. You can use any web browser to log in to the PCI BLW-54MF router.

Put the Internal IP Address of your PCI BLW-54MF in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your PCI BLW-54MF login infomation.

Default login data for PCI BLW-54MF

You need to know the username and password to log in to your PCI BLW-54MF router. We listed below.

Model Ip Username & Password
PCI BLW-54MF Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other PCI BLW-54MF Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of PCI BLW-54MF Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to PCI BLW-54MF router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the PCI BLW-54MF Router To Default Settings?

If you still can not get logged in, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change PCI BLW-54MF Default Wifi Name (SSID)

By default, some PCI BLW-54MF routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for PCI BLW-54MF

MAC filtering allows you to restrict access to your PCI BLW-54MF router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your PCI BLW-54MF router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for PCI BLW-54MF router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

eighteen + eleven =