To get access to PCI BLW-HPMM router, you need the login IP address of your router, the username, and password.
You can find these information in PCI BLW-HPMM router manual. But if you lost it, then you can use the quick guide below.
Login to the PCI BLW-HPMM Router
The PCI BLW-HPMM has a web interface for configuration. You can use any web browser to log in to the PCI BLW-HPMM router.
Put the Login IP Address of your PCI BLW-HPMM in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your PCI BLW-HPMM login infomation.
Default login data for PCI BLW-HPMM
You need to know the username and password to log in to your PCI BLW-HPMM router. We listed below.
|Model||Ip||Username & Password|
|PCI BLW-HPMM||192.168.1.1||Username:admin/ Password:0|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other PCI BLW-HPMM Login Problems
If you can’t get a login to your router, here are a few possible solutions you can try.
The Password of PCI BLW-HPMM Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to PCI BLW-HPMM router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the PCI BLW-HPMM Router To Default Settings?
If you still can not login the setup page of router, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.
Change PCI BLW-HPMM Default Wifi Name (SSID)
By default, some PCI BLW-HPMM routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for PCI BLW-HPMM
MAC filtering allows you to restrict access to your PCI BLW-HPMM router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your PCI BLW-HPMM router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for PCI BLW-HPMM router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.