To get access to pcWRT TORONTO-N router, you need the login IP address of your router, the username, and password.
You can find these data in pcWRT TORONTO-N router manual. But if you do not have the manual for your router, then you can use the quick guide below.
Login to the pcWRT TORONTO-N Router
The pcWRT TORONTO-N has a web interface for configuration. You can use any web browser to log in to the pcWRT TORONTO-N router.
Put the Login IP Address of your pcWRT TORONTO-N in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your pcWRT TORONTO-N login data.
Default login data for pcWRT TORONTO-N
You need to know the username and password to log in to your pcWRT TORONTO-N router. We listed below.
|Model||Ip||Username & Password|
|pcWRT TORONTO-N||192.168.10.1||Username:(none)/ Password:pcwrt|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other pcWRT TORONTO-N Login Problems
If you can’t get a login to your router, here are some possible solutions you can try.
The Password of pcWRT TORONTO-N Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to pcWRT TORONTO-N router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the pcWRT TORONTO-N Router To Default Settings?
If you can not get logged in, then you are probably going to reset your router to its factory settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change pcWRT TORONTO-N Default Wifi Name (SSID)
By default, some pcWRT TORONTO-N routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for pcWRT TORONTO-N
MAC filtering allows you to restrict access to your pcWRT TORONTO-N router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your pcWRT TORONTO-N router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.10.1 on the address.
- Enter the username and password for pcWRT TORONTO-N router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.