Default Password for Pirelli Wireless VoIP AG Router

To get access to Pirelli Wireless VoIP AG router, you need the login IP address of your router, the username, and password.

You can find these data in Pirelli Wireless VoIP AG router manual. But if you lost it, then you can use the quick guide below.

Login to the Pirelli Wireless VoIP AG Router

The Pirelli Wireless VoIP AG has a web interface for configuration. You can use any web browser to log in to the Pirelli Wireless VoIP AG router.

Put the Internal IP Address of your Pirelli Wireless VoIP AG in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Pirelli Wireless VoIP AG login username & password.

Default login data for Pirelli Wireless VoIP AG

You need to know the username and password to log in to your Pirelli Wireless VoIP AG router. We listed below.

Model Ip Username & Password
Pirelli Wireless VoIP AG 192.168.1.1 Username:user/ Password:user

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Pirelli Wireless VoIP AG Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Pirelli Wireless VoIP AG Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Pirelli Wireless VoIP AG router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Pirelli Wireless VoIP AG Router To Default Settings?

If you can’t get logged in, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Pirelli Wireless VoIP AG Default Wifi Name (SSID)

By default, some Pirelli Wireless VoIP AG routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Pirelli Wireless VoIP AG

MAC filtering allows you to restrict access to your Pirelli Wireless VoIP AG router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Pirelli Wireless VoIP AG router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Pirelli Wireless VoIP AG router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

19 − 18 =