Default Password for Planet ADE-4100 Router

To get access to Planet ADE-4100 router, you need the login IP address of your router, the username, and password.

You can find these data in Planet ADE-4100 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Planet ADE-4100 Router

The Planet ADE-4100 has a web interface for configuration. You can use any web browser to log in to the Planet ADE-4100 router.

Put the Internal IP Address of your Planet ADE-4100 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Planet ADE-4100 login infomation.

Default login data for Planet ADE-4100

You need to know the username and password to log in to your Planet ADE-4100 router. We listed below.

Model Ip Username & Password
Planet ADE-4100 10.0.0.2 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Planet ADE-4100 Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Planet ADE-4100 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Planet ADE-4100 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Planet ADE-4100 Router To Default Settings?

If you still can’t get logged in, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Planet ADE-4100 Default Wifi Name (SSID)

By default, some Planet ADE-4100 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Planet ADE-4100

MAC filtering allows you to restrict access to your Planet ADE-4100 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Planet ADE-4100 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 10.0.0.2 on the address.
  2. Enter the username and password for Planet ADE-4100 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

fourteen − ten =