Default Password for Prolink H5001N Router

To get access to Prolink H5001N router, you need the login IP address of your router, the username, and password.

You can find these information in Prolink H5001N router manual. But if you lost it, then you can use the quick guide below.

Login to the Prolink H5001N Router

The Prolink H5001N has a web interface for configuration. You can use any web browser to log in to the Prolink H5001N router.

Put the IP Address(without “http://” or “https://”) of your Prolink H5001N in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Prolink H5001N login infomation.

Default login data for Prolink H5001N

You need to know the username and password to log in to your Prolink H5001N router. We listed below.

Model Ip Username & Password
Prolink H5001N Username:admin/ Password:password

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Prolink H5001N Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Prolink H5001N Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Prolink H5001N router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Prolink H5001N Router To Default Settings?

If you can not get logged in, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Prolink H5001N Default Wifi Name (SSID)

By default, some Prolink H5001N routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Prolink H5001N

MAC filtering allows you to restrict access to your Prolink H5001N router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Prolink H5001N router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Prolink H5001N router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

three × 5 =