To get access to Prolink Hurricane 9000 router, you need the login IP address of your router, the username, and password.
You can find these data in Prolink Hurricane 9000 router manual. But if you lost it, then you can use the quick guide below.
Login to the Prolink Hurricane 9000 Router
The Prolink Hurricane 9000 has a web interface for configuration. You can use any web browser to log in to the Prolink Hurricane 9000 router.
Put the IP Address(without “http://” or “https://”) of your Prolink Hurricane 9000 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Prolink Hurricane 9000 login infomation.
Default login data for Prolink Hurricane 9000
You need to know the username and password to log in to your Prolink Hurricane 9000 router. We listed below.
|Model||Ip||Username & Password|
|Prolink Hurricane 9000||10.0.0.2||Username:admin/ Password:password|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Prolink Hurricane 9000 Login Problems
If you can’t get a login to your router, here are a few possible solutions you can try.
The Password of Prolink Hurricane 9000 Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Prolink Hurricane 9000 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Prolink Hurricane 9000 Router To Default Settings?
If you can not access the router’s setup page, then you are probably going to reset your router to its default settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change Prolink Hurricane 9000 Default Wifi Name (SSID)
By default, some Prolink Hurricane 9000 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Prolink Hurricane 9000
MAC filtering allows you to restrict access to your Prolink Hurricane 9000 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Prolink Hurricane 9000 router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 10.0.0.2 on the address.
- Enter the username and password for Prolink Hurricane 9000 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.