To get access to Prolink PRS1241B router, you need the login IP address of your router, the username, and password.
You can find these info in Prolink PRS1241B router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the Prolink PRS1241B Router
The Prolink PRS1241B has a web interface for configuration. You can use any web browser to log in to the Prolink PRS1241B router.
Put the Login IP Address of your Prolink PRS1241B in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Prolink PRS1241B login username & password.
Default login data for Prolink PRS1241B
You need to know the username and password to log in to your Prolink PRS1241B router. We listed below.
|Model||Ip||Username & Password|
|Prolink PRS1241B||192.168.1.1||Username:admin/ Password:1234|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Prolink PRS1241B Login Problems
If you can not get a login to your router, here are some possible solutions you can try.
The Password of Prolink PRS1241B Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Prolink PRS1241B router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Prolink PRS1241B Router To Default Settings?
If you still can not get logged in, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.
Change Prolink PRS1241B Default Wifi Name (SSID)
By default, some Prolink PRS1241B routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Prolink PRS1241B
MAC filtering allows you to restrict access to your Prolink PRS1241B router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Prolink PRS1241B router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for Prolink PRS1241B router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.