Default Password for Prolink WGR1004 Router

To get access to Prolink WGR1004 router, you need the login IP address of your router, the username, and password.

You can find these info in Prolink WGR1004 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Prolink WGR1004 Router

The Prolink WGR1004 has a web interface for configuration. You can use any web browser to log in to the Prolink WGR1004 router.

Put the Internal IP Address of your Prolink WGR1004 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Prolink WGR1004 login data.

Default login data for Prolink WGR1004

You need to know the username and password to log in to your Prolink WGR1004 router. We listed below.

Model Ip Username & Password
Prolink WGR1004 192.168.1.254 Username:admin/ Password:1234

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Prolink WGR1004 Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Prolink WGR1004 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Prolink WGR1004 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Prolink WGR1004 Router To Default Settings?

If you can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Prolink WGR1004 Default Wifi Name (SSID)

By default, some Prolink WGR1004 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Prolink WGR1004

MAC filtering allows you to restrict access to your Prolink WGR1004 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Prolink WGR1004 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for Prolink WGR1004 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

four × 5 =