Default Password for Rockwell Automation Allen-Bradley PVPlus 6 Router

To get access to Rockwell Automation Allen-Bradley PVPlus 6 router, you need the login IP address of your router, the username, and password.

You can find these data in Rockwell Automation Allen-Bradley PVPlus 6 router manual. But if you lost it, then you can use the quick guide below.

Login to the Rockwell Automation Allen-Bradley PVPlus 6 Router

The Rockwell Automation Allen-Bradley PVPlus 6 has a web interface for configuration. You can use any web browser to log in to the Rockwell Automation Allen-Bradley PVPlus 6 router.

Put the Login IP Address of your Rockwell Automation Allen-Bradley PVPlus 6 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Rockwell Automation Allen-Bradley PVPlus 6 login infomation.

Default login data for Rockwell Automation Allen-Bradley PVPlus 6

You need to know the username and password to log in to your Rockwell Automation Allen-Bradley PVPlus 6 router. We listed below.

Model Ip Username & Password
Rockwell Automation Allen-Bradley PVPlus 6 192.168.1.1 Username:Administrator/admin/ Password:printed on router

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Rockwell Automation Allen-Bradley PVPlus 6 Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Rockwell Automation Allen-Bradley PVPlus 6 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Rockwell Automation Allen-Bradley PVPlus 6 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Rockwell Automation Allen-Bradley PVPlus 6 Router To Default Settings?

If you can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Rockwell Automation Allen-Bradley PVPlus 6 Default Wifi Name (SSID)

By default, some Rockwell Automation Allen-Bradley PVPlus 6 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Rockwell Automation Allen-Bradley PVPlus 6

MAC filtering allows you to restrict access to your Rockwell Automation Allen-Bradley PVPlus 6 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Rockwell Automation Allen-Bradley PVPlus 6 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Rockwell Automation Allen-Bradley PVPlus 6 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

4 + 9 =