To get access to Rosewill RNX-N300RT router, you need the login IP address of your router, the username, and password.
You can find these data in Rosewill RNX-N300RT router manual. But if you lost it, then you can use the quick guide below.
Login to the Rosewill RNX-N300RT Router
The Rosewill RNX-N300RT has a web interface for configuration. You can use any web browser to log in to the Rosewill RNX-N300RT router.
Put the Login IP Address of your Rosewill RNX-N300RT in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Rosewill RNX-N300RT login data.
Default login data for Rosewill RNX-N300RT
You need to know the username and password to log in to your Rosewill RNX-N300RT router. We listed below.
|Model||Ip||Username & Password|
|Rosewill RNX-N300RT||192.168.1.1||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Rosewill RNX-N300RT Login Problems
If you can’t get a login to your router, here are a few possible solutions you can try.
The Password of Rosewill RNX-N300RT Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Rosewill RNX-N300RT router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the Rosewill RNX-N300RT Router To Default Settings?
If you still can not access the router’s setup page, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change Rosewill RNX-N300RT Default Wifi Name (SSID)
By default, some Rosewill RNX-N300RT routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Rosewill RNX-N300RT
MAC filtering allows you to restrict access to your Rosewill RNX-N300RT router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Rosewill RNX-N300RT router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for Rosewill RNX-N300RT router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.