Default Password for Sagemcom Fast 5355 Router

To get access to Sagemcom Fast 5355 router, you need the login IP address of your router, the username, and password.

You can find these info in Sagemcom Fast 5355 router manual. But if you lost it, then you can use the quick guide below.

Login to the Sagemcom Fast 5355 Router

The Sagemcom Fast 5355 has a web interface for configuration. You can use any web browser to log in to the Sagemcom Fast 5355 router.

Put the Internal IP Address of your Sagemcom Fast 5355 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Sagemcom Fast 5355 login username & password.

Default login data for Sagemcom Fast 5355

You need to know the username and password to log in to your Sagemcom Fast 5355 router. We listed below.

Model Ip Username & Password
Sagemcom Fast 5355 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Sagemcom Fast 5355 Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Sagemcom Fast 5355 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Sagemcom Fast 5355 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Sagemcom Fast 5355 Router To Default Settings?

If you can’t access the router’s setup page, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Sagemcom Fast 5355 Default Wifi Name (SSID)

By default, some Sagemcom Fast 5355 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Sagemcom Fast 5355

MAC filtering allows you to restrict access to your Sagemcom Fast 5355 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Sagemcom Fast 5355 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Sagemcom Fast 5355 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

twelve + 6 =