Default Password for Scientific Atlanta WebSTAR DPR2320 Router

To get access to Scientific Atlanta WebSTAR DPR2320 router, you need the login IP address of your router, the username, and password.

You can find these info in Scientific Atlanta WebSTAR DPR2320 router manual. But if you lost it, then you can use the quick guide below.

Login to the Scientific Atlanta WebSTAR DPR2320 Router

The Scientific Atlanta WebSTAR DPR2320 has a web interface for configuration. You can use any web browser to log in to the Scientific Atlanta WebSTAR DPR2320 router.

Put the Login IP Address of your Scientific Atlanta WebSTAR DPR2320 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Scientific Atlanta WebSTAR DPR2320 login username & password.

Default login data for Scientific Atlanta WebSTAR DPR2320

You need to know the username and password to log in to your Scientific Atlanta WebSTAR DPR2320 router. We listed below.

Model Ip Username & Password
Scientific Atlanta WebSTAR DPR2320 192.168.0.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Scientific Atlanta WebSTAR DPR2320 Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Scientific Atlanta WebSTAR DPR2320 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Scientific Atlanta WebSTAR DPR2320 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Scientific Atlanta WebSTAR DPR2320 Router To Default Settings?

If you still can’t access the router’s setup page, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Scientific Atlanta WebSTAR DPR2320 Default Wifi Name (SSID)

By default, some Scientific Atlanta WebSTAR DPR2320 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Scientific Atlanta WebSTAR DPR2320

MAC filtering allows you to restrict access to your Scientific Atlanta WebSTAR DPR2320 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Scientific Atlanta WebSTAR DPR2320 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Scientific Atlanta WebSTAR DPR2320 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

two × three =