To get access to Siemens 4100 router, you need the login IP address of your router, the username, and password.
You can find these data in Siemens 4100 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the Siemens 4100 Router
The Siemens 4100 has a web interface for configuration. You can use any web browser to log in to the Siemens 4100 router.
Put the Login IP Address of your Siemens 4100 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Siemens 4100 login infomation.
Default login data for Siemens 4100
You need to know the username and password to log in to your Siemens 4100 router. We listed below.
|Model||Ip||Username & Password|
|Siemens 4100||10.0.0.138||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Siemens 4100 Login Problems
If you can not get a login to your router, here are a few possible solutions you can try.
The Password of Siemens 4100 Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Siemens 4100 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Siemens 4100 Router To Default Settings?
If you still can not login the setup page of router, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.
Change Siemens 4100 Default Wifi Name (SSID)
By default, some Siemens 4100 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Siemens 4100
MAC filtering allows you to restrict access to your Siemens 4100 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Siemens 4100 router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 10.0.0.138 on the address.
- Enter the username and password for Siemens 4100 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.