To get access to Siemens SL2-141 router, you need the login IP address of your router, the username, and password.
You can find these info in Siemens SL2-141 router manual. But if you lost it, then you can use the quick guide below.
Login to the Siemens SL2-141 Router
The Siemens SL2-141 has a web interface for configuration. You can use any web browser to log in to the Siemens SL2-141 router.
Put the Internal IP Address of your Siemens SL2-141 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Siemens SL2-141 login data.
Default login data for Siemens SL2-141
You need to know the username and password to log in to your Siemens SL2-141 router. We listed below.
|Model||Ip||Username & Password|
|Siemens SL2-141||10.0.0.138||Username:admin/ Password:BSNL1234|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Siemens SL2-141 Login Problems
If you not be able to get a login to your router, here are some possible solutions you can try.
The Password of Siemens SL2-141 Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Siemens SL2-141 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the Siemens SL2-141 Router To Default Settings?
If you still can’t get logged in, then you are probably going to reset your router to its default settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change Siemens SL2-141 Default Wifi Name (SSID)
By default, some Siemens SL2-141 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Siemens SL2-141
MAC filtering allows you to restrict access to your Siemens SL2-141 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Siemens SL2-141 router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 10.0.0.138 on the address.
- Enter the username and password for Siemens SL2-141 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.