To get access to Sitecom DC-201 router, you need the login IP address of your router, the username, and password.
You can find these info in Sitecom DC-201 router manual. But if you do not have the manual for your router, then you can use the quick guide below.
Login to the Sitecom DC-201 Router
The Sitecom DC-201 has a web interface for configuration. You can use any web browser to log in to the Sitecom DC-201 router.
Put the Internal IP Address of your Sitecom DC-201 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Sitecom DC-201 login username & password.
Default login data for Sitecom DC-201
You need to know the username and password to log in to your Sitecom DC-201 router. We listed below.
|Model||Ip||Username & Password|
|Sitecom DC-201||192.168.0.1||Username:(none)/ Password:(none)|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Sitecom DC-201 Login Problems
If you can’t get a login to your router, here are some possible solutions you can try.
The Password of Sitecom DC-201 Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Sitecom DC-201 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the Sitecom DC-201 Router To Default Settings?
If you can’t login the setup page of router, then you have to reset your router to its factory settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change Sitecom DC-201 Default Wifi Name (SSID)
By default, some Sitecom DC-201 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Sitecom DC-201
MAC filtering allows you to restrict access to your Sitecom DC-201 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Sitecom DC-201 router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.0.1 on the address.
- Enter the username and password for Sitecom DC-201 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.