Default Password for Sitecom WLM-5600 Router

To get access to Sitecom WLM-5600 router, you need the login IP address of your router, the username, and password.

You can find these info in Sitecom WLM-5600 router manual. But if you lost it, then you can use the quick guide below.

Login to the Sitecom WLM-5600 Router

The Sitecom WLM-5600 has a web interface for configuration. You can use any web browser to log in to the Sitecom WLM-5600 router.

Put the Internal IP Address of your Sitecom WLM-5600 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Sitecom WLM-5600 login username & password.

Default login data for Sitecom WLM-5600

You need to know the username and password to log in to your Sitecom WLM-5600 router. We listed below.

Model Ip Username & Password
Sitecom WLM-5600 192.168.0.1 Username:admin/ Password:Printed on Routers Label

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Sitecom WLM-5600 Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Sitecom WLM-5600 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Sitecom WLM-5600 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Sitecom WLM-5600 Router To Default Settings?

If you can not login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Sitecom WLM-5600 Default Wifi Name (SSID)

By default, some Sitecom WLM-5600 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Sitecom WLM-5600

MAC filtering allows you to restrict access to your Sitecom WLM-5600 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Sitecom WLM-5600 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Sitecom WLM-5600 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

17 − twelve =