To get access to Skyworth NTUD-B10 router, you need the login IP address of your router, the username, and password.
You can find these information in Skyworth NTUD-B10 router manual. But if you lost it, then you can use the quick guide below.
Login to the Skyworth NTUD-B10 Router
The Skyworth NTUD-B10 has a web interface for configuration. You can use any web browser to log in to the Skyworth NTUD-B10 router.
Put the Internal IP Address of your Skyworth NTUD-B10 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Skyworth NTUD-B10 login data.
Default login data for Skyworth NTUD-B10
You need to know the username and password to log in to your Skyworth NTUD-B10 router. We listed below.
|Model||Ip||Username & Password|
|Skyworth NTUD-B10||192.168.1.1||Username:admin/ Password:printed on router|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Skyworth NTUD-B10 Login Problems
If you can not get a login to your router, here are some possible solutions you can try.
The Password of Skyworth NTUD-B10 Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Skyworth NTUD-B10 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the Skyworth NTUD-B10 Router To Default Settings?
If you can not get logged in, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change Skyworth NTUD-B10 Default Wifi Name (SSID)
By default, some Skyworth NTUD-B10 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Skyworth NTUD-B10
MAC filtering allows you to restrict access to your Skyworth NTUD-B10 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Skyworth NTUD-B10 router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for Skyworth NTUD-B10 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.