Default Password for SMC SMCWBR14S-N4 Router

To get access to SMC SMCWBR14S-N4 router, you need the login IP address of your router, the username, and password.

You can find these info in SMC SMCWBR14S-N4 router manual. But if you lost it, then you can use the quick guide below.

Login to the SMC SMCWBR14S-N4 Router

The SMC SMCWBR14S-N4 has a web interface for configuration. You can use any web browser to log in to the SMC SMCWBR14S-N4 router.

Put the IP Address(without “http://” or “https://”) of your SMC SMCWBR14S-N4 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your SMC SMCWBR14S-N4 login data.

Default login data for SMC SMCWBR14S-N4

You need to know the username and password to log in to your SMC SMCWBR14S-N4 router. We listed below.

Model Ip Username & Password
SMC SMCWBR14S-N4 192.168.2.1 Username:admin/ Password:smcadmin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other SMC SMCWBR14S-N4 Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of SMC SMCWBR14S-N4 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to SMC SMCWBR14S-N4 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the SMC SMCWBR14S-N4 Router To Default Settings?

If you can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change SMC SMCWBR14S-N4 Default Wifi Name (SSID)

By default, some SMC SMCWBR14S-N4 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for SMC SMCWBR14S-N4

MAC filtering allows you to restrict access to your SMC SMCWBR14S-N4 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your SMC SMCWBR14S-N4 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.2.1 on the address.
  2. Enter the username and password for SMC SMCWBR14S-N4 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

fifteen + 6 =