Default Password for Technicolor TC7210.dNZ Router

To get access to Technicolor TC7210.dNZ router, you need the login IP address of your router, the username, and password.

You can find these data in Technicolor TC7210.dNZ router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Technicolor TC7210.dNZ Router

The Technicolor TC7210.dNZ has a web interface for configuration. You can use any web browser to log in to the Technicolor TC7210.dNZ router.

Put the IP Address(without “http://” or “https://”) of your Technicolor TC7210.dNZ in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Technicolor TC7210.dNZ login infomation.

Default login data for Technicolor TC7210.dNZ

You need to know the username and password to log in to your Technicolor TC7210.dNZ router. We listed below.

Model Ip Username & Password
Technicolor TC7210.dNZ Username:(none)/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Technicolor TC7210.dNZ Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Technicolor TC7210.dNZ Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Technicolor TC7210.dNZ router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Technicolor TC7210.dNZ Router To Default Settings?

If you still can not access the router’s setup page, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Technicolor TC7210.dNZ Default Wifi Name (SSID)

By default, some Technicolor TC7210.dNZ routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Technicolor TC7210.dNZ

MAC filtering allows you to restrict access to your Technicolor TC7210.dNZ router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Technicolor TC7210.dNZ router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Technicolor TC7210.dNZ router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

twenty − 15 =