Default Password for Technicolor TC7210.Z Router

To get access to Technicolor TC7210.Z router, you need the login IP address of your router, the username, and password.

You can find these info in Technicolor TC7210.Z router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Technicolor TC7210.Z Router

The Technicolor TC7210.Z has a web interface for configuration. You can use any web browser to log in to the Technicolor TC7210.Z router.

Put the Internal IP Address of your Technicolor TC7210.Z in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Technicolor TC7210.Z login data.

Default login data for Technicolor TC7210.Z

You need to know the username and password to log in to your Technicolor TC7210.Z router. We listed below.

Model Ip Username & Password
Technicolor TC7210.Z Username:ziggo/ Password:draadloos

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Technicolor TC7210.Z Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Technicolor TC7210.Z Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Technicolor TC7210.Z router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Technicolor TC7210.Z Router To Default Settings?

If you still can’t login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Technicolor TC7210.Z Default Wifi Name (SSID)

By default, some Technicolor TC7210.Z routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Technicolor TC7210.Z

MAC filtering allows you to restrict access to your Technicolor TC7210.Z router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Technicolor TC7210.Z router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Technicolor TC7210.Z router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

three − three =