Default Password for Technicolor TG582n Router

To get access to Technicolor TG582n router, you need the login IP address of your router, the username, and password.

You can find these info in Technicolor TG582n router manual. But if you lost it, then you can use the quick guide below.

Login to the Technicolor TG582n Router

The Technicolor TG582n has a web interface for configuration. You can use any web browser to log in to the Technicolor TG582n router.

Put the Login IP Address of your Technicolor TG582n in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Technicolor TG582n login username & password.

Default login data for Technicolor TG582n

You need to know the username and password to log in to your Technicolor TG582n router. We listed below.

Model Ip Username & Password
Technicolor TG582n Username:TELMEX/ Password:printed on router

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Technicolor TG582n Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Technicolor TG582n Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Technicolor TG582n router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Technicolor TG582n Router To Default Settings?

If you still can’t access the router’s setup page, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Technicolor TG582n Default Wifi Name (SSID)

By default, some Technicolor TG582n routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Technicolor TG582n

MAC filtering allows you to restrict access to your Technicolor TG582n router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Technicolor TG582n router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Technicolor TG582n router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

5 + thirteen =