Default Password for Technicolor TG789vac v2 MediaAccess iiNet Router

To get access to Technicolor TG789vac v2 MediaAccess iiNet router, you need the login IP address of your router, the username, and password.

You can find these information in Technicolor TG789vac v2 MediaAccess iiNet router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Technicolor TG789vac v2 MediaAccess iiNet Router

The Technicolor TG789vac v2 MediaAccess iiNet has a web interface for configuration. You can use any web browser to log in to the Technicolor TG789vac v2 MediaAccess iiNet router.

Put the Login IP Address of your Technicolor TG789vac v2 MediaAccess iiNet in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Technicolor TG789vac v2 MediaAccess iiNet login username & password.

Default login data for Technicolor TG789vac v2 MediaAccess iiNet

You need to know the username and password to log in to your Technicolor TG789vac v2 MediaAccess iiNet router. We listed below.

Model Ip Username & Password
Technicolor TG789vac v2 MediaAccess iiNet 10.1.1.1 Username:admin/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Technicolor TG789vac v2 MediaAccess iiNet Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Technicolor TG789vac v2 MediaAccess iiNet Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Technicolor TG789vac v2 MediaAccess iiNet router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Technicolor TG789vac v2 MediaAccess iiNet Router To Default Settings?

If you can’t login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Technicolor TG789vac v2 MediaAccess iiNet Default Wifi Name (SSID)

By default, some Technicolor TG789vac v2 MediaAccess iiNet routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Technicolor TG789vac v2 MediaAccess iiNet

MAC filtering allows you to restrict access to your Technicolor TG789vac v2 MediaAccess iiNet router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Technicolor TG789vac v2 MediaAccess iiNet router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 10.1.1.1 on the address.
  2. Enter the username and password for Technicolor TG789vac v2 MediaAccess iiNet router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

one × 1 =