Default Password for Technicolor TG799vn v2 Router

To get access to Technicolor TG799vn v2 router, you need the login IP address of your router, the username, and password.

You can find these data in Technicolor TG799vn v2 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Technicolor TG799vn v2 Router

The Technicolor TG799vn v2 has a web interface for configuration. You can use any web browser to log in to the Technicolor TG799vn v2 router.

Put the IP Address(without “http://” or “https://”) of your Technicolor TG799vn v2 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Technicolor TG799vn v2 login infomation.

Default login data for Technicolor TG799vn v2

You need to know the username and password to log in to your Technicolor TG799vn v2 router. We listed below.

Model Ip Username & Password
Technicolor TG799vn v2 Username:Administrator/ Password:printed on router

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Technicolor TG799vn v2 Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Technicolor TG799vn v2 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Technicolor TG799vn v2 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Technicolor TG799vn v2 Router To Default Settings?

If you still can’t get logged in, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Technicolor TG799vn v2 Default Wifi Name (SSID)

By default, some Technicolor TG799vn v2 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Technicolor TG799vn v2

MAC filtering allows you to restrict access to your Technicolor TG799vn v2 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Technicolor TG799vn v2 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Technicolor TG799vn v2 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

11 + ten =