To get access to Telewell TW-LTE600 router, you need the login IP address of your router, the username, and password.
You can find these data in Telewell TW-LTE600 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the Telewell TW-LTE600 Router
The Telewell TW-LTE600 has a web interface for configuration. You can use any web browser to log in to the Telewell TW-LTE600 router.
Put the Internal IP Address of your Telewell TW-LTE600 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Telewell TW-LTE600 login infomation.
Default login data for Telewell TW-LTE600
You need to know the username and password to log in to your Telewell TW-LTE600 router. We listed below.
|Model||Ip||Username & Password|
|Telewell TW-LTE600||192.168.0.254||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Telewell TW-LTE600 Login Problems
If you not be able to get a login to your router, here are some possible solutions you can try.
The Password of Telewell TW-LTE600 Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Telewell TW-LTE600 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Telewell TW-LTE600 Router To Default Settings?
If you still can not login the setup page of router, then you are probably going to reset your router to its factory settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change Telewell TW-LTE600 Default Wifi Name (SSID)
By default, some Telewell TW-LTE600 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Telewell TW-LTE600
MAC filtering allows you to restrict access to your Telewell TW-LTE600 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Telewell TW-LTE600 router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.0.254 on the address.
- Enter the username and password for Telewell TW-LTE600 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.