Default Password for Tenda W311R+ Router

To get access to Tenda W311R+ router, you need the login IP address of your router, the username, and password.

You can find these information in Tenda W311R+ router manual. But if you lost it, then you can use the quick guide below.

Login to the Tenda W311R+ Router

The Tenda W311R+ has a web interface for configuration. You can use any web browser to log in to the Tenda W311R+ router.

Put the Internal IP Address of your Tenda W311R+ in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Tenda W311R+ login data.

Default login data for Tenda W311R+

You need to know the username and password to log in to your Tenda W311R+ router. We listed below.

Model Ip Username & Password
Tenda W311R+ 192.168.0.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Tenda W311R+ Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Tenda W311R+ Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Tenda W311R+ router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Tenda W311R+ Router To Default Settings?

If you can’t access the router’s setup page, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Tenda W311R+ Default Wifi Name (SSID)

By default, some Tenda W311R+ routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Tenda W311R+

MAC filtering allows you to restrict access to your Tenda W311R+ router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Tenda W311R+ router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Tenda W311R+ router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

9 + ten =