Default Password for Thomson Alcatel TCW750-4 Router

To get access to Thomson Alcatel TCW750-4 router, you need the login IP address of your router, the username, and password.

You can find these data in Thomson Alcatel TCW750-4 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Thomson Alcatel TCW750-4 Router

The Thomson Alcatel TCW750-4 has a web interface for configuration. You can use any web browser to log in to the Thomson Alcatel TCW750-4 router.

Put the Internal IP Address of your Thomson Alcatel TCW750-4 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Thomson Alcatel TCW750-4 login username & password.

Default login data for Thomson Alcatel TCW750-4

You need to know the username and password to log in to your Thomson Alcatel TCW750-4 router. We listed below.

Model Ip Username & Password
Thomson Alcatel TCW750-4 192.168.0.1 Username:(none)/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Thomson Alcatel TCW750-4 Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Thomson Alcatel TCW750-4 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Thomson Alcatel TCW750-4 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Thomson Alcatel TCW750-4 Router To Default Settings?

If you still can not login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Thomson Alcatel TCW750-4 Default Wifi Name (SSID)

By default, some Thomson Alcatel TCW750-4 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Thomson Alcatel TCW750-4

MAC filtering allows you to restrict access to your Thomson Alcatel TCW750-4 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Thomson Alcatel TCW750-4 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Thomson Alcatel TCW750-4 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

  2. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

nine + 19 =