Default Password for Thomson TG585v8 Telecom Router

To get access to Thomson TG585v8 Telecom router, you need the login IP address of your router, the username, and password.

You can find these info in Thomson TG585v8 Telecom router manual. But if you lost it, then you can use the quick guide below.

Login to the Thomson TG585v8 Telecom Router

The Thomson TG585v8 Telecom has a web interface for configuration. You can use any web browser to log in to the Thomson TG585v8 Telecom router.

Put the Internal IP Address of your Thomson TG585v8 Telecom in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Thomson TG585v8 Telecom login infomation.

Default login data for Thomson TG585v8 Telecom

You need to know the username and password to log in to your Thomson TG585v8 Telecom router. We listed below.

Model Ip Username & Password
Thomson TG585v8 Telecom 192.168.1.254 Username:(none)/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Thomson TG585v8 Telecom Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Thomson TG585v8 Telecom Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Thomson TG585v8 Telecom router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Thomson TG585v8 Telecom Router To Default Settings?

If you still can not access the router’s setup page, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Thomson TG585v8 Telecom Default Wifi Name (SSID)

By default, some Thomson TG585v8 Telecom routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Thomson TG585v8 Telecom

MAC filtering allows you to restrict access to your Thomson TG585v8 Telecom router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Thomson TG585v8 Telecom router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for Thomson TG585v8 Telecom router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

ten + 4 =