Default Password for Topcom WBR 354G Router

To get access to Topcom WBR 354G router, you need the login IP address of your router, the username, and password.

You can find these data in Topcom WBR 354G router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Topcom WBR 354G Router

The Topcom WBR 354G has a web interface for configuration. You can use any web browser to log in to the Topcom WBR 354G router.

Put the IP Address(without “http://” or “https://”) of your Topcom WBR 354G in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Topcom WBR 354G login data.

Default login data for Topcom WBR 354G

You need to know the username and password to log in to your Topcom WBR 354G router. We listed below.

Model Ip Username & Password
Topcom WBR 354G Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Topcom WBR 354G Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Topcom WBR 354G Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Topcom WBR 354G router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Topcom WBR 354G Router To Default Settings?

If you can’t get logged in, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Topcom WBR 354G Default Wifi Name (SSID)

By default, some Topcom WBR 354G routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Topcom WBR 354G

MAC filtering allows you to restrict access to your Topcom WBR 354G router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Topcom WBR 354G router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Topcom WBR 354G router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

nine + eight =