Default Password for Topcom WBR 611 Router

To get access to Topcom WBR 611 router, you need the login IP address of your router, the username, and password.

You can find these data in Topcom WBR 611 router manual. But if you lost it, then you can use the quick guide below.

Login to the Topcom WBR 611 Router

The Topcom WBR 611 has a web interface for configuration. You can use any web browser to log in to the Topcom WBR 611 router.

Put the Internal IP Address of your Topcom WBR 611 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Topcom WBR 611 login infomation.

Default login data for Topcom WBR 611

You need to know the username and password to log in to your Topcom WBR 611 router. We listed below.

Model Ip Username & Password
Topcom WBR 611 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Topcom WBR 611 Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Topcom WBR 611 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Topcom WBR 611 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Topcom WBR 611 Router To Default Settings?

If you can’t login the setup page of router, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Topcom WBR 611 Default Wifi Name (SSID)

By default, some Topcom WBR 611 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Topcom WBR 611

MAC filtering allows you to restrict access to your Topcom WBR 611 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Topcom WBR 611 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Topcom WBR 611 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

fifteen + 6 =