Default Password for TOT X8824M Router

To get access to TOT X8824M router, you need the login IP address of your router, the username, and password.

You can find these data in TOT X8824M router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the TOT X8824M Router

The TOT X8824M has a web interface for configuration. You can use any web browser to log in to the TOT X8824M router.

Put the IP Address(without “http://” or “https://”) of your TOT X8824M in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your TOT X8824M login infomation.

Default login data for TOT X8824M

You need to know the username and password to log in to your TOT X8824M router. We listed below.

Model Ip Username & Password
TOT X8824M Username:admin/ Password:tot

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other TOT X8824M Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of TOT X8824M Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to TOT X8824M router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the TOT X8824M Router To Default Settings?

If you can not access the router’s setup page, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change TOT X8824M Default Wifi Name (SSID)

By default, some TOT X8824M routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for TOT X8824M

MAC filtering allows you to restrict access to your TOT X8824M router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your TOT X8824M router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for TOT X8824M router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

19 − 16 =