Default Password for TrendChip TW263R4-A1 Router

To get access to TrendChip TW263R4-A1 router, you need the login IP address of your router, the username, and password.

You can find these data in TrendChip TW263R4-A1 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the TrendChip TW263R4-A1 Router

The TrendChip TW263R4-A1 has a web interface for configuration. You can use any web browser to log in to the TrendChip TW263R4-A1 router.

Put the IP Address(without “http://” or “https://”) of your TrendChip TW263R4-A1 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your TrendChip TW263R4-A1 login data.

Default login data for TrendChip TW263R4-A1

You need to know the username and password to log in to your TrendChip TW263R4-A1 router. We listed below.

Model Ip Username & Password
TrendChip TW263R4-A1 192.168.1.1 Username:admin/ Password:1234

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other TrendChip TW263R4-A1 Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of TrendChip TW263R4-A1 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to TrendChip TW263R4-A1 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the TrendChip TW263R4-A1 Router To Default Settings?

If you still can not access the router’s setup page, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change TrendChip TW263R4-A1 Default Wifi Name (SSID)

By default, some TrendChip TW263R4-A1 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for TrendChip TW263R4-A1

MAC filtering allows you to restrict access to your TrendChip TW263R4-A1 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your TrendChip TW263R4-A1 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for TrendChip TW263R4-A1 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

8 + four =