Default Password for Trendnet TE100-S810Fi Router

To get access to Trendnet TE100-S810Fi router, you need the login IP address of your router, the username, and password.

You can find these data in Trendnet TE100-S810Fi router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Trendnet TE100-S810Fi Router

The Trendnet TE100-S810Fi has a web interface for configuration. You can use any web browser to log in to the Trendnet TE100-S810Fi router.

Put the Login IP Address of your Trendnet TE100-S810Fi in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Trendnet TE100-S810Fi login infomation.

Default login data for Trendnet TE100-S810Fi

You need to know the username and password to log in to your Trendnet TE100-S810Fi router. We listed below.

Model Ip Username & Password
Trendnet TE100-S810Fi 192.168.16.1 Username:root/ Password:root

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Trendnet TE100-S810Fi Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Trendnet TE100-S810Fi Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Trendnet TE100-S810Fi router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Trendnet TE100-S810Fi Router To Default Settings?

If you can not login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Trendnet TE100-S810Fi Default Wifi Name (SSID)

By default, some Trendnet TE100-S810Fi routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Trendnet TE100-S810Fi

MAC filtering allows you to restrict access to your Trendnet TE100-S810Fi router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Trendnet TE100-S810Fi router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.16.1 on the address.
  2. Enter the username and password for Trendnet TE100-S810Fi router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

3 × 5 =