Default Password for Trendnet TEG-2248WS Router

To get access to Trendnet TEG-2248WS router, you need the login IP address of your router, the username, and password.

You can find these information in Trendnet TEG-2248WS router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Trendnet TEG-2248WS Router

The Trendnet TEG-2248WS has a web interface for configuration. You can use any web browser to log in to the Trendnet TEG-2248WS router.

Put the Login IP Address of your Trendnet TEG-2248WS in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Trendnet TEG-2248WS login infomation.

Default login data for Trendnet TEG-2248WS

You need to know the username and password to log in to your Trendnet TEG-2248WS router. We listed below.

Model Ip Username & Password
Trendnet TEG-2248WS 192.168.0.1 Username:(none)/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Trendnet TEG-2248WS Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Trendnet TEG-2248WS Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Trendnet TEG-2248WS router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Trendnet TEG-2248WS Router To Default Settings?

If you can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Trendnet TEG-2248WS Default Wifi Name (SSID)

By default, some Trendnet TEG-2248WS routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Trendnet TEG-2248WS

MAC filtering allows you to restrict access to your Trendnet TEG-2248WS router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Trendnet TEG-2248WS router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Trendnet TEG-2248WS router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

4 × five =