Default Password for Trendnet TEG-S2620i Router

To get access to Trendnet TEG-S2620i router, you need the login IP address of your router, the username, and password.

You can find these data in Trendnet TEG-S2620i router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Trendnet TEG-S2620i Router

The Trendnet TEG-S2620i has a web interface for configuration. You can use any web browser to log in to the Trendnet TEG-S2620i router.

Put the IP Address(without “http://” or “https://”) of your Trendnet TEG-S2620i in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Trendnet TEG-S2620i login username & password.

Default login data for Trendnet TEG-S2620i

You need to know the username and password to log in to your Trendnet TEG-S2620i router. We listed below.

Model Ip Username & Password
Trendnet TEG-S2620i 192.168.223.100 Username:admin/ Password:123

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Trendnet TEG-S2620i Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Trendnet TEG-S2620i Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Trendnet TEG-S2620i router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Trendnet TEG-S2620i Router To Default Settings?

If you can not login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Trendnet TEG-S2620i Default Wifi Name (SSID)

By default, some Trendnet TEG-S2620i routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Trendnet TEG-S2620i

MAC filtering allows you to restrict access to your Trendnet TEG-S2620i router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Trendnet TEG-S2620i router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.223.100 on the address.
  2. Enter the username and password for Trendnet TEG-S2620i router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

three + 9 =