Default Password for Trendnet TEG-S2620is Router

To get access to Trendnet TEG-S2620is router, you need the login IP address of your router, the username, and password.

You can find these info in Trendnet TEG-S2620is router manual. But if you lost it, then you can use the quick guide below.

Login to the Trendnet TEG-S2620is Router

The Trendnet TEG-S2620is has a web interface for configuration. You can use any web browser to log in to the Trendnet TEG-S2620is router.

Put the Login IP Address of your Trendnet TEG-S2620is in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Trendnet TEG-S2620is login username & password.

Default login data for Trendnet TEG-S2620is

You need to know the username and password to log in to your Trendnet TEG-S2620is router. We listed below.

Model Ip Username & Password
Trendnet TEG-S2620is 192.168.0.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Trendnet TEG-S2620is Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Trendnet TEG-S2620is Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Trendnet TEG-S2620is router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Trendnet TEG-S2620is Router To Default Settings?

If you still can not access the router’s setup page, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Trendnet TEG-S2620is Default Wifi Name (SSID)

By default, some Trendnet TEG-S2620is routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Trendnet TEG-S2620is

MAC filtering allows you to restrict access to your Trendnet TEG-S2620is router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Trendnet TEG-S2620is router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Trendnet TEG-S2620is router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

four × two =