Default Password for Trendnet TEW-231BRP Router

To get access to Trendnet TEW-231BRP router, you need the login IP address of your router, the username, and password.

You can find these information in Trendnet TEW-231BRP router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Trendnet TEW-231BRP Router

The Trendnet TEW-231BRP has a web interface for configuration. You can use any web browser to log in to the Trendnet TEW-231BRP router.

Put the IP Address(without “http://” or “https://”) of your Trendnet TEW-231BRP in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Trendnet TEW-231BRP login data.

Default login data for Trendnet TEW-231BRP

You need to know the username and password to log in to your Trendnet TEW-231BRP router. We listed below.

Model Ip Username & Password
Trendnet TEW-231BRP 192.168.1.1 Username:(none)/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Trendnet TEW-231BRP Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Trendnet TEW-231BRP Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Trendnet TEW-231BRP router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Trendnet TEW-231BRP Router To Default Settings?

If you can not login the setup page of router, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Trendnet TEW-231BRP Default Wifi Name (SSID)

By default, some Trendnet TEW-231BRP routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Trendnet TEW-231BRP

MAC filtering allows you to restrict access to your Trendnet TEW-231BRP router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Trendnet TEW-231BRP router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Trendnet TEW-231BRP router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

two × 3 =