Default Password for Ubee DDW 336 Router

To get access to Ubee DDW 336 router, you need the login IP address of your router, the username, and password.

You can find these data in Ubee DDW 336 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Ubee DDW 336 Router

The Ubee DDW 336 has a web interface for configuration. You can use any web browser to log in to the Ubee DDW 336 router.

Put the IP Address(without “http://” or “https://”) of your Ubee DDW 336 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Ubee DDW 336 login infomation.

Default login data for Ubee DDW 336

You need to know the username and password to log in to your Ubee DDW 336 router. We listed below.

Model Ip Username & Password
Ubee DDW 336 Username:user/ Password:user

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Ubee DDW 336 Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Ubee DDW 336 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Ubee DDW 336 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Ubee DDW 336 Router To Default Settings?

If you can not access the router’s setup page, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Ubee DDW 336 Default Wifi Name (SSID)

By default, some Ubee DDW 336 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Ubee DDW 336

MAC filtering allows you to restrict access to your Ubee DDW 336 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Ubee DDW 336 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Ubee DDW 336 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

3 × 2 =