Default Password for Ubee DVW3201B Router

To get access to Ubee DVW3201B router, you need the login IP address of your router, the username, and password.

You can find these info in Ubee DVW3201B router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Ubee DVW3201B Router

The Ubee DVW3201B has a web interface for configuration. You can use any web browser to log in to the Ubee DVW3201B router.

Put the Internal IP Address of your Ubee DVW3201B in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Ubee DVW3201B login infomation.

Default login data for Ubee DVW3201B

You need to know the username and password to log in to your Ubee DVW3201B router. We listed below.

Model Ip Username & Password
Ubee DVW3201B 192.168.0.1 Username:user/ Password:user

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Ubee DVW3201B Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Ubee DVW3201B Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Ubee DVW3201B router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Ubee DVW3201B Router To Default Settings?

If you can’t access the router’s setup page, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Ubee DVW3201B Default Wifi Name (SSID)

By default, some Ubee DVW3201B routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Ubee DVW3201B

MAC filtering allows you to restrict access to your Ubee DVW3201B router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Ubee DVW3201B router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Ubee DVW3201B router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

four × 4 =