Default Password for V-Link VLR-1505n Router

To get access to V-Link VLR-1505n router, you need the login IP address of your router, the username, and password.

You can find these data in V-Link VLR-1505n router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the V-Link VLR-1505n Router

The V-Link VLR-1505n has a web interface for configuration. You can use any web browser to log in to the V-Link VLR-1505n router.

Put the Login IP Address of your V-Link VLR-1505n in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your V-Link VLR-1505n login username & password.

Default login data for V-Link VLR-1505n

You need to know the username and password to log in to your V-Link VLR-1505n router. We listed below.

Model Ip Username & Password
V-Link VLR-1505n 192.168.15.1 Username:admin/ Password:gvt12345

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other V-Link VLR-1505n Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of V-Link VLR-1505n Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to V-Link VLR-1505n router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the V-Link VLR-1505n Router To Default Settings?

If you can’t get logged in, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change V-Link VLR-1505n Default Wifi Name (SSID)

By default, some V-Link VLR-1505n routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for V-Link VLR-1505n

MAC filtering allows you to restrict access to your V-Link VLR-1505n router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your V-Link VLR-1505n router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.15.1 on the address.
  2. Enter the username and password for V-Link VLR-1505n router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

  2. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

17 + three =