Default Password for Verizon Jetpack MiFi 6620L Router

To get access to Verizon Jetpack MiFi 6620L router, you need the login IP address of your router, the username, and password.

You can find these info in Verizon Jetpack MiFi 6620L router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Verizon Jetpack MiFi 6620L Router

The Verizon Jetpack MiFi 6620L has a web interface for configuration. You can use any web browser to log in to the Verizon Jetpack MiFi 6620L router.

Put the Internal IP Address of your Verizon Jetpack MiFi 6620L in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Verizon Jetpack MiFi 6620L login username & password.

Default login data for Verizon Jetpack MiFi 6620L

You need to know the username and password to log in to your Verizon Jetpack MiFi 6620L router. We listed below.

Model Ip Username & Password
Verizon Jetpack MiFi 6620L 192.168.1.1 Username:(none)/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Verizon Jetpack MiFi 6620L Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Verizon Jetpack MiFi 6620L Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Verizon Jetpack MiFi 6620L router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Verizon Jetpack MiFi 6620L Router To Default Settings?

If you still can’t get logged in, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Verizon Jetpack MiFi 6620L Default Wifi Name (SSID)

By default, some Verizon Jetpack MiFi 6620L routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Verizon Jetpack MiFi 6620L

MAC filtering allows you to restrict access to your Verizon Jetpack MiFi 6620L router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Verizon Jetpack MiFi 6620L router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Verizon Jetpack MiFi 6620L router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

  2. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

8 − 6 =