Default Password for Vonage VDV21-VD Router

To get access to Vonage VDV21-VD router, you need the login IP address of your router, the username, and password.

You can find these information in Vonage VDV21-VD router manual. But if you lost it, then you can use the quick guide below.

Login to the Vonage VDV21-VD Router

The Vonage VDV21-VD has a web interface for configuration. You can use any web browser to log in to the Vonage VDV21-VD router.

Put the Login IP Address of your Vonage VDV21-VD in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Vonage VDV21-VD login username & password.

Default login data for Vonage VDV21-VD

You need to know the username and password to log in to your Vonage VDV21-VD router. We listed below.

Model Ip Username & Password
Vonage VDV21-VD 192.168.0.100 Username:user/ Password:user

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Vonage VDV21-VD Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Vonage VDV21-VD Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Vonage VDV21-VD router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Vonage VDV21-VD Router To Default Settings?

If you can not login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Vonage VDV21-VD Default Wifi Name (SSID)

By default, some Vonage VDV21-VD routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Vonage VDV21-VD

MAC filtering allows you to restrict access to your Vonage VDV21-VD router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Vonage VDV21-VD router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.100 on the address.
  2. Enter the username and password for Vonage VDV21-VD router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

13 + 12 =