Default Password for Westell b90-740010-07 Router

To get access to Westell b90-740010-07 router, you need the login IP address of your router, the username, and password.

You can find these info in Westell b90-740010-07 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Westell b90-740010-07 Router

The Westell b90-740010-07 has a web interface for configuration. You can use any web browser to log in to the Westell b90-740010-07 router.

Put the Internal IP Address of your Westell b90-740010-07 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Westell b90-740010-07 login infomation.

Default login data for Westell b90-740010-07

You need to know the username and password to log in to your Westell b90-740010-07 router. We listed below.

Model Ip Username & Password
Westell b90-740010-07 192.168.1.1 Username:admin/ Password:password

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Westell b90-740010-07 Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Westell b90-740010-07 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Westell b90-740010-07 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Westell b90-740010-07 Router To Default Settings?

If you can not access the router’s setup page, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Westell b90-740010-07 Default Wifi Name (SSID)

By default, some Westell b90-740010-07 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Westell b90-740010-07

MAC filtering allows you to restrict access to your Westell b90-740010-07 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Westell b90-740010-07 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Westell b90-740010-07 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

3 × four =