Default Password for Xavi X5258-P2 Router

To get access to Xavi X5258-P2 router, you need the login IP address of your router, the username, and password.

You can find these information in Xavi X5258-P2 router manual. But if you lost it, then you can use the quick guide below.

Login to the Xavi X5258-P2 Router

The Xavi X5258-P2 has a web interface for configuration. You can use any web browser to log in to the Xavi X5258-P2 router.

Put the Login IP Address of your Xavi X5258-P2 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Xavi X5258-P2 login data.

Default login data for Xavi X5258-P2

You need to know the username and password to log in to your Xavi X5258-P2 router. We listed below.

Model Ip Username & Password
Xavi X5258-P2 192.168.1.1 Username:Admin/ Password:Admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Xavi X5258-P2 Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Xavi X5258-P2 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Xavi X5258-P2 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Xavi X5258-P2 Router To Default Settings?

If you still can not access the router’s setup page, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Xavi X5258-P2 Default Wifi Name (SSID)

By default, some Xavi X5258-P2 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Xavi X5258-P2

MAC filtering allows you to restrict access to your Xavi X5258-P2 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Xavi X5258-P2 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Xavi X5258-P2 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

7 − 1 =