Default Password for Zhone 6729-W1 Router

To get access to Zhone 6729-W1 router, you need the login IP address of your router, the username, and password.

You can find these information in Zhone 6729-W1 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Zhone 6729-W1 Router

The Zhone 6729-W1 has a web interface for configuration. You can use any web browser to log in to the Zhone 6729-W1 router.

Put the Internal IP Address of your Zhone 6729-W1 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Zhone 6729-W1 login data.

Default login data for Zhone 6729-W1

You need to know the username and password to log in to your Zhone 6729-W1 router. We listed below.

Model Ip Username & Password
Zhone 6729-W1 Username:admin/ Password:cciadmin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Zhone 6729-W1 Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Zhone 6729-W1 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Zhone 6729-W1 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Zhone 6729-W1 Router To Default Settings?

If you still can’t access the router’s setup page, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Zhone 6729-W1 Default Wifi Name (SSID)

By default, some Zhone 6729-W1 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Zhone 6729-W1

MAC filtering allows you to restrict access to your Zhone 6729-W1 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Zhone 6729-W1 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Zhone 6729-W1 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

5 + nine =